Errors

Error: Failed to push some Refs in remote Git Repository

remote Git Repository
Written by Sandip Lokhande

While working with Git you have encountered “Error: Failed to push some Refs in remote Git Repository” This error mainly affects people who work on the same codebase as well as other people. This happens if changes made to the Version Control repository have not yet been moved to the local repository.

This error can occur when working with a team on a project and pushing to a branch simultaneously. Too often, users become frustrated when they encounter this error. We have listed six ways you can solve this problem.

What are some of the reasons for this error?

If you receive this error message while using Gerrit, it may be due to:

  • Improper change id in the commit
  • Not committing initial changes before pushing them into the repository.
  • Lack of text files
  • Failed to add files before attempting to make changes
  • Issues with a Git pre-push hook
  • Local repository not in sync with Git repository
  • The branch name format is incorrect

How Can I Fix the Error Message Error: Failed to Push Some Refs to Remote Git?

The “error: failed to push some refs into remote Git” can be fixed with some technical steps. Note the instructions Git gives you many times; They provide a pointer to what went wrong and how to fix it. If the instructions do not work, you can try detailed solutions.

Before trying out more advanced steps:

  1. Give this a try, run an initial commit, and make sure you do not have any uncommitted changes responsible for this error.
  2. When you’re done, right-click on the “Remote” on the side of the source tree and select “Push to Origin.”
  3. Run the program and check if the error message still pops up.

Solution 1: Make sure you are working with the right pair of repositories

data-preserver-spaces=”true”>This error may be due to an improperly matched repository pair. This means that the local repository name does not match the remote collection name. To check this issue, you need to verify that both repository names are compatible before making changes to the remote repository.

If you mistype the repository name, you can delete the local archive using the following steps.

  1. Enter the command line del /F /S /Q /A .git hit enter, then input the rmdir .git command.
  2. Correct the local repository name (XXXX02-> XXXX20). If this is a newly created repository, you can delete it and recreate the repository properly. For example, you can change the repository name from the wrong XXXX02 name to the correct repository name XXXX20.
  3. Input the command line: Start init. Don’t forget to press enter after the input.
  4. Check if it is mapped. If not, remap with remote storage. Next, Git Remote add origin https://github.com/<username>/XXXX20.git
  5. Now enter Git push –u origin master.

Solution 2: Git pull

Before making any new changes to the remote Git, we must pull. First, you need to be able to tell the difference between git push and git pull. Pushing takes a new commit history from the local repository to GitHub. Git pull, on the other hand, collects changes from your GitHub collection and adds them to your local collection.

It combines Git fetch, and Git merges into one smooth command, effectively taking small changes from your remote archive and synchronizing them to your local branch.

The following steps will help you to fix the error with Git Pull.

  1. Git pull –rebase origin [master | main | other branch names]
  2. Git push origin[master | main | other branch names] 

If that fails to resolve the error, please try the next fix.

Solution 3: Git Push

As mentioned earlier, Push includes the transfer of recent changes from the local repository to GitHub. If you run Push and get this output or below,

To git@git.assembla.com:shabbir-s-test.git

! [rejected] your-branch -> your-branch (non-fast-forward) 

This means that the commitment to the same branch you are pushing for yourself has been carried forward by someone else.

To resolve this error, run:

  • Git pull origin <your-branch>
  • Git push origin <your-branch> 

Instead, you can try this simple and robust solution.

  • Git Pull – Rebase Origin Master.
  • Git Push Origin Master. Clear the blog

Remember to commit before you start these steps. After commitment, you can push now.

Solution 4: Try to push

A common cause of the error is due to failure to follow through with Push. For example, if you do not push fast even though you committed, someone else may get over you, which will prevent you from trying. When you are delaying to move, you will notice that another collaborator is working and pushing.

The solution to this is to push your work from time to time and not go into the dark and work offline for long hours. It is better for the project when you commit, push, and integrate more often. This regular Push makes every combination smaller, less problematic, and more prone to errors. However, to avoid Git mergers, you should only push contributions that you are willing to share.

Solution 5: Use branches

Your initial experience working with yourself and others in the Master‌ will give you a deeper understanding of why many Git users will eventually start using the branches. Branches usually provide transparent workflows that can be used to combine different tasks in any way you want. Going to the units is better than trying to rebuild or merge when you are frustrated or panicked strategically.

Solution 6: Check your activity directory

You may sometimes see an error: Some suggestions failed to push the Git repository message due to some inconsistency between your Git history and GitHub. This means that your record on the local Git repository and GitHub Remote‌ has been distorted.

If so, we advise you to get more information about the situation. You can learn more about the problem by visiting your Git client, Git status, or your GitHub hidden history in the browser. These tools help identify lost works that have caused incompatibility. Try the following solution to solve this problem.

  1. Input the Git pull command, and then press Enter.
  2. Next, enter the command git push. Do not forget to press Enter after inputting the command.
  3. Do not force Push directly to the remote server.
  4. Input the following command git push –force

Alternatively, you can use this method. To get all the push-related options, enter the following command: git push –help.

A clear example of this discrepancy in histories has been given below.

If what you have on the GitHub history is A — B – C, and what you have on your local repository history is A — B – D, you may witness this error message. You will be unable to merge on your GitHub history when you push because of this discrepancy. Instead, you have to pull the commit C and integrate it into your D before you can push again. 

Error: Failed to Push Some Refs to BitBucket 

One reason you might see this error is missing a local code. If the master branch contains code that is not included locally, it will prevent you from pushing further changes.

To resolve this issue, we recommend pulling all the changes to your local repository. Entering the Command Line: Git pull origin master –allow-unrelated-histories can help solve this problem. Once the code is entered, you have all the codes available in the master branch. 

Note: Be careful when dragging codes from the remote branch. Any mistake can lead to a compromise of all changes made locally. Make sure all changes are saved or create a separate local department to pull the original master branch. This way, you do not have to worry about the changes you make.

Final words

Facing “Error: Failed to provide some refs for remote git collection” can occur for several reasons: a new commit is pushed into the repository while still working locally. We recommend that you add the files and check that the repository names match before making changes.

About the author

Sandip Lokhande

I'm a Blogger and very much Innovative and up to date. Also I would like to write about Technology, Business, Software, Finance & Gadgets. You can connect with me on - techniciansnow1@gmail.com

Leave a Comment